RV Sewer Hose Supports – Complete Review

For our first RV sewer hose support, we have the Camco 15-Foot Sidewinder. Its sturdy design cradles the hose to keep it off the ground and prevents it from puncture damage while you connect to a dump station. It is compatible with standard three-inch diameter sewer hoses and is easy to adjust for a perfect fit.

The grooves and sidewinding design allow you to curve around potential obstacles and secure it in place, exactly where you need it. When it is not in use, it collapses into a compact unit for easy storage. There is an orange custom fit storage handle for carrying it as well.

It is angled to promote quick drainage. It is 7.25 inches at its tallest and four inches at its lowest, creating a gradual slope that speeds up the septic drainage process.

Made entirely from plastic, this product is the perfect combination of durability and low weight. The plastic is resistant to rust and corrosion, so you can easily use this in different weather conditions. A quick rinse is enough to clean it. The support comes pre-assembled and ready to use, no set up required.

Bottom Line

Sturdy and compact, the Camco 15-Foot Sidewinder gets the job done. The cradle design provides reliable support for the hose and the slope it creates will help to speed up the dreaded drainage process. It can experience some stability problems on uneven surfaces, but you can adjust the pieces to help compensate for this issue.

The Valterra A04-0009 RV Trailer Camper Sanitation Sewer Hose Support's simple, easy slider design helps maintain stability while emptying the septic tank. To use this support, extend it, wrap the adjustable chain around the RV pipe opening, and then carefully attach the sewer hose. The three 36-inch sections will hang underneath the hose.

It can hold a hose reaching a maximum of 10 feet in length but does not have the capacity to hold a lot of weight. The support itself is slim and light, so you can easily bring it along on every trip.

This RV sewer hose support is best used for shorter trips or at destinations where you know you will have access to more amenities, as its design is not as sophisticated as the others on this list. It still provides extra stability to improve the overall draining process and it is simple and straightforward to use. There is no setup required, so it is great to use if you are short on time.

Bottom Line

The primary advantages of the Valterra A04-0009 RV Trailer Camper Sanitation Sewer Hose Support are its accessibility and simplicity. It has a straightforward design that is a breeze to set-up and use, so it is great if you need a lightweight support you can use frequently.

It does not have the same stability or weight capacity as other items on this list, but if you need something to provide a little extra support, it is quick, compact, and still gets the job done.

Reaching 25-feet in total, the Level-Trek LT80090 is a high quality RV sewer hose support that works well with a variety of hoses and terrains. The pieces decline in height to create a slope to aid in the drainage process. The deep grooves create a cradling effect that keeps the hose secure and supported. There is also an included velcro strap to keep the hose from moving.

This design also allows it to snake in different configurations, so you can adapt the set up to avoid barriers like rocks or bushes. It is constructed from sturdy but lightweight plastic that is flexible and works well on a range of surfaces. It is durable and made to last for a long time, so it is a great option if you will be traveling a lot, especially in different weather conditions and environments that can cause wear on equipment.

The plastic material makes it super easy to clean, as well. All you have to do is give it a rinse with a hose and you’ll be set. It can stretch out nearly 30 feet while in use but is easy to condense into a smaller unit for compact storage.

Bottom Line

If you need extra length, this hose support has you covered. Its durable and versatile design is perfect for the true RV adventurer. It can withstand many different terrain types and weather conditions.

It does not raise the hose very far off the ground, which is something to be aware of if you’ll be in an area with lots of small critters, but it still fits on most RV sewer hose systems. It is designed to be adjustable, so you can arrange it around different obstacles at your campsite and the length provides extra flexibility.

The Camco 43071 Adjustable Sewer Hose Drain Support Kit is made of six 30-inch trough sections that can support up to 20 feet of sewer hose. The troughs cradle the hose, providing stable and reliable support. The height of each trough can be adjusted using the knobs. It is made from heavy-duty, weatherproof material that can endure different conditions.

Since the troughs are independent of each other, it is easy to arrange the support system to make turns or go over small obstacles like curbs and rocks. There are 24 stakes included as well (four per section) for extra stability if you are using the support on a soft surface. If you are using it on concrete or another hard surface, the support will still work fine without the stakes.

For storing the support, the six sections can easily be stacked on each other to take up minimal space. The kit also comes with a handy storage bag so you can keep the troughs and stakes together in one place.

Bottom Line

This versatile support kit provides the most customizability, so it is a great choice if you know you’ll be using your sewer hose in a variety of locations with different conditions and terrain. The six independent troughs do not connect to each other.

You can strategically arrange them in any configuration you want to effectively support your hose across all kinds of environments. It takes a little more time to set up the unit since you have to arrange them each time, but the setup allows you to easily navigate around obstacles.

Incredibly sturdy and durable, the Camco Aluminum RV Sewer Hose Support is ideal for trips in cold climates and harsh conditions. It is available in two sizes to fit both 10-foot and 15-foot setups. The stand is made entirely from weatherproof aluminum that is both sturdy and lightweight. The aluminum construction, combined with the solid brass rivets, ensure the entire unit is resistant to rust and corrosion.

When in use, it telescopes to six feet but can be folded down to six inches for storage. It is designed so the individual stands won’t creep together when in use.

Unlike most of the other models, this product does not utilize a cradle design to support the sewer hose. Instead, there is a slight dip that the hose sits in and a strap kit used to secure the hose to the stands for stability.

Bottom Line 

Its superior design keeps the individual stands from creeping towards each other when the support is in use, but this sturdiness means the unit also tends to be pretty stiff.

It's not as easy to make turns with this model, which is something to keep in mind if you prefer a more flexible option. However, the Camco Aluminum Sewer Hose Support is incredibly durable and long lasting. Additionally, the quality of its material and overall construction is top-tier.

Another excellent RV sewer hose support from Valterra that's durable and reliable. Its design includes metal hinges for increased strength and durability. The different sections join together to create a cradle that securely supports the hose.

The newest version of the Valterra Slunky model increases the depth of the channels for even better security, so the hose will be sure to stay in place. It also creates a gradual slope to keep the contents moving through the hose.

This design allows the support to hold the hose while making turns and avoiding obstacles, so you can arrange it to fit the type of environment you are in. The feet are also serrated to provide a sturdy grip on different surfaces.

It is available in four sizes: 10-foot, 15-foot, 20-foot, and 25-foot. The individual stands can be joined together with a self-fastening strap for convenient storage.

Bottom Line

With its deep grooves and adaptable design, the Valterra Slunky will provide stability for your sewer hose in a variety of different settings. The sewer hose support is available in four different sizes, so make sure you get the correct one for your hose length. The only problem you may encounter with more lightweight hoses is the stands creeping together. However, if you have a heavy hose, the weight will help keep them in place during use.

What Recent Buyers Report

Recent buyers have found this flexible sewer hose support to be very convenient, as it is fairly easy to set up. They can easily slip it around the hose and stretch it out to cover the area between the sewer hookup and the RV. They also appreciate the fact that they can arrange the height of every individual vertical support, as this allows them to use this product on various terrains.   

Why it Stands Out to Us

The TFlex RV draining hose support is a revolutionary product as it offers a simple and convenient solution for draining your wastewater task. We also like the fact that it hardly takes any time to set it up. Moreover, it can be adjusted to various slopes and campground configurations, which is another plus point. Its robust structure and height adjustment delivers a perfect draining angle as your sewer hose is always above the ground.  

Bottom Line    

If you want to save the time spent on dealing with draining problems, then the TFlex RV draining hose support is for you. This highly compact unit can be easily retracted and stored in the storage bag provided, thus ensuring space-saving. Made with high-quality plastic, this product can fit all sizes and formats of drain hoses of fifth wheels, trailers, and RVs.